Read the latest edition of the Machinery Market here
At the Oil & Gas Asia trade show, Schwarze-Robitec will present its high-quality tube and pipe bending machines for the offshore industry.
This long-established company from Germany places the efficiency and profitability of tube bending and pipe bending at the center of its trade show presence. In Hall 9, Booth 9077, the internationally very knowledgeable company experts will answer all questions on this subject.
Schwarze-Robitec is the world's leading producer of tube-bending machines and is a strong global player in the important Asian market.
For the second time, the company, which was founded in 1903, takes part in the largest trade fair for the oil and gas industry in Asia. At the Kuala Lumpur Convention Center in Malaysia, trade visitors at the Schwarze-Robitec booth will receive information on the "Made in Germany" special solutions, tailored to the complex needs of the offshore industry. Furthermore, the company will present the numerous advantages of bent tube systems compared to welded solutions at its booth in the "German Pavilion" of the trade fair. These advantages mean considerable time and cost savings that can be achieved during production. Due to the high-quality processing obtained with Schwarze-Robitec bending machines, the tubes and pipes also exhibit a particularly high wear resistance and dimensional stability.
Interested visitors receive detailed advice on all questions concerning tube and pipe bending processes for the oil and offshore industry. Schwarze-Robitec experts will be happy to assist you.
| A Schwarze-Robitec release || May 25, 2017 |||
/ins Low investment. Long life. High performance.
T-model is as rare as an entry level waterjet cutting system based on very high quality standard. Water Jet Sweden has for decades been building quality waterjet cutting machines for the most demanding customers. A craftsmanship rooted in Swedish industrial tradition with machine installed all around the world. The new T-model is based on that tradition.Meeting a tough requirement specification
The T-model is Water Jet Sweden’s first machine model with a flying bridge construction widening the already broad product range. It has been designed to meet a list of very specific requirements: It had to fit into a container to get low transportation cost. It had to be quick and easy to install and must be easy to operate. The result is a complete machine system available at a market price from around € 100 000. This is a completely new price segment for Water jet Sweden as a manufacturer.
A multi-purpose waterjet cutting tool
The T-model is a multi-purpose waterjet machine designed for in-house production, part manufacturing, design workshops, engineering workshops and prototype workshops, cutting any kind of material of various size and shape. You get all the basic functions you need. Metal cutting, composite cutting, glass cutting, stone cutting, tile cutting, rubber cutting, plastic cutting, wood cutting, you name it. With the T- model you are able to cut virtually any material with the same cutting tool, up to 200 mm thick.
Five Year Performance warranty and awarded reliability
T-model is operated with a real CNC control system from Fanuc, who for the last decades has been awarded best reliability and availability in the world. The machine system is powered with original intensifier pumps from BFT and KMT, which are leading European and American high pressure pump manufacturers. The waterjet cutting machine itself include the unique extended five-year performance warranty, built by the same experienced Swedish engineers as the rest of Water Jet Sweden product range. Water Jet Sweden guarantees that it will keep the same tolerance requirements after five years, or 10 000 hours, as when the machine was first delivered.
The T-model meets a new market but deliver the reliability and comfort of a high end cutting system.
| For more information visit http://waterjetsweden.com || April 04, 2017 |||
This is a story we have been wanting to tell Matthew Weakes from CADPRO Systems told MSCNewsWire. Our Gavin Bath (one of Technical Specialist based in CHCH) helped Phil (principal of Sprint Aero get some outstanding results.
In response, Phil has decided to kindly open his doors and fire up his BBQ on the 30th of March and invite people to come along and see what it’s all about.
It’s a great opportunity to network with your peers in the industry, as well as see HSMWorks for Solidworks cutting chips with their Haas UMC-750.
Space is limited and filling fast, so if you can make it, please register your interest on this page. We will get back to you and confirm your place by the end of this week, if not sooner.
Event details and registration
SCHAUMBURG, IL (February 2017) - HEIDENHAIN's popular TNC 640 mill-turn control is now available with an exciting new option, a 3D Probing cycle, called Cycle 444. Already equipped with both manual and automatic probing cycles for datum setting, workpiece alignment and inspection, the TNC 640 offers this additional 3D probing cycle to meet manufacturers' increased requirements for automation and advanced probing routines that inspect free form surfaces where measurement positions are often difficult to capture.
Cycle 444 checks one specific point on the surface of each workpiece. The contact point is determined by a vector that is normal to the 3D surface. The measurement cycle enables the measurement of 3D shapes such as free form surfaces of a mold part, and based on a defined tolerance range along the vector, checks the determined measured values. It is advisable to determine the normal vector with the help of a CAD/CAM system.
As with all HEIDENHAIN control cycles for automatic probing, a parameter is given for classifying a part as Good/Rework/Scrap. Additionally, the TNC outputs a log file with documented positions and deviations.
If option 92 "3D-ToolComp" is active on the TNC 640, a touch probe can be recalibrated using a calibration ball, and the system accuracy for measurements can be improved in this way. The key here is that the touch probe is re-calibrated for various contact points along the ball-tip of the touch probe styli. In that way, repeatability is increased for the vectors formed by the contacts points and the spheres' centers.
HEIDENHAIN also offers touch probes. The TS 460 is a universal touch probe with optical trigger mechanism for higher repeatability and also features a collision-adapter.
The TNC 640 is HEIDENHAIN versatile mill-turn control with conversational programming, the perfect solution for demanding machining tasks in regard to speed, accuracy and high surface definition.For more information, contact HEIDENHAIN's Product Specialist for Machine Tools, Julian Renz at (847) 884-4761 (This email address is being protected from spambots. You need JavaScript enabled to view it.) or write to us at HEIDENHAIN CORPORATION, 333 E. State Parkway, Schaumburg, IL 60173. HEIDENHAIN can also be accessed directly via our web site at www.heidenhain.us.
HEIDENHAIN CORPORATION is the North American subsidiary of DR. JOHANNES HEIDENHAIN GmbH, a leading international manufacturer of precision measurement and control equipment. Our product line includes linear scales, rotary and angular encoders, digital readouts, digital length gauges, CNC controls, and machine inspection equipment.
| A Heidenhain release | February 21, 2017 ||
Machine tool operator, Haimer has strengthened its commercial partnership with DMG Mori, will become their premium partner and has acquired Microset GmBH.
The cooperation agreement means that DMG Mori will purchase all products related to tool pre-setting, balancing and shrinking including shrink fit holders as well Tool Rooms exclusively from Haimer.
The agreement also means that DMG Mori will continue to display Haimer Microset products during exhibitions that they will continue to distribute these products through their worldwide sales and service companies.
According to the company, DMG Mori’s Microset Tool-Presetting Technology complements its existing product portfolio. In addition to high-precision tool holders in all popular interfaces and lengths, the current product portfolio includes a variety of shrinking and balancing machines.
Haimer chief executive officer Claudia Haimer said that the company’s operations will change somewhat with the new acquisition.
“Since the company location of Haimer Microset GmbH with about 35 employees will remain in Bielefeld, Germany, this will be our second HAIMER production site, including our main headquarters in Igenhausen, Augsburg, Germany,” Haimer said.
“The Bielefeld facility will be further expanded to become our Northern Germany sales and marketing hub, where we will be able to present the complete process chain that surrounds the machine tool to current and prospective customers.”
| Published in Manufacturers'Monthly | February 14, 2017 ||
Connected machines deliver double the bending length and press force – single-machine operation boosts capacity – ToolShuttle with space for 60 meters of tools – shorter set-up and search times, higher productivity bold
The sheet-metal plates that demonstrate the power and precision of the TruBend Series 8000 are famously big and fat – and now the TRUMPF machines for bending large-format components can actually deliver twice the performance. How? In a tandem version. Bending expert Babette Kopp from TRUMPF Machine Tools in Teningen explains: “If you utilize two machines as just one, it gives you the option of doubling the bending length, that is, up to 8100 millimeters, and also of doubling the press force – and that adds up to 10,000 kilonewtons. In other words, the parts portfolio can be expanded significantly, because compared to any stand-alone machine in the 8000 series, the user can bend longer material.”
The tandem version comes as standard with a C-frame with a throat depth of 820 millimeters and a maximum distance between table and press beam of 820 millimeters. This, combined with the fact that the table width is a mere 140 millimeters despite the enormous bending forces, further increases bending flexibility and part variety. Of course, each machine can also be operated individually, for double the capacity with less setup work.
Rapid speed is also no problem in tandem operationFor safe operation in stand-alone mode, the two machines are separated from each other at the push of a button by a protective door. In tandem operation, the door moves back automatically, so that bending can take place along the entire length. To ensure maximum process reliability, the BendGuard safety systems of the two individual machines are connected to one another – so the entire bending length is directly under control on the tandem machine, enabling rapid speed even in connected operation.
Surface-mounted version for easy installationInstallation of the tandem is uncomplicated because, unlike other large-format bending machines, it arrives as standard in the production hall as a surface-mounted version. Costs for elaborate machine foundations are no longer necessary. Instead, the two stand-alone machines are individually loaded from the truck and simply connected to each other. Here, the tandem partners are fixed together precisely using tensioning screws with fine threads. In addition, the machine tables are bolted using solid connecting elements – ensuring stability and accuracy during tandem operation for the best possible bending results.
Fewer tool changes for more productivity and part varietyWith the TruBend Series 8000, high-quality bending is guaranteed by means of mechanical crowning with a precisely adjustable crowning curve. Thanks to the selective adjustment option of the crowning and precise synchronization of both machines, the tandem version offers bending results that are just as good as those of the stand-alone machine. The CNC-controlled crowning ensures constant angle accuracy along the entire bending length.
In contrast to the eight-meter-long stand-alone machine, the TruBend Series 8000 tandem version enables lower tool offset (I-axis) along the entire bending length. This allows a great variety of different bends, and also folds, using the same combination of upper and lower tools. The number of tool changes decreases, while productivity and part variety are both increased.
ToolShuttle – storage space for a full 60 meters of toolsFor even more productivity on large-format TRUMPF machines, the ToolShuttle now offers a special storage system for upper and lower tools. Babette Kopp explains: “With the ToolShuttle, users are being given a tooling concept for heavy tools for the first time. It enables simple and ergonomic setup while minimizing setup and search times.” For TRUMPF bending machines in the 8000 Series weighing up to 600 tonnes, the ToolShuttle has room for up to 28 upper and 32 lower tool compartments – that adds up to total storage space for more than 60 meters of tools! In order to avoid tilting of offset tools, special storage compartments ensure correct support. Further storage space is provided by practical drawers in the lower part of the ToolShuttle.
Easy transportation of heavy tools – with the intelligent transfer unitVia a moveable transfer unit with three tool holders at the top and bottom respectively, the tools are brought to the bending machine. This not only protects the operator’s back: if he equips the upper and lower transfer unit with new tools and moves them to the bending machine, he can also push the tools to be changed into one of the free tool holders at the same time. This means that he can equip and remove tools in just one operation. A useful additional option: The turning unit makes it possible to turn heavy and/or offset tools through 180 degrees without any effort at all.
| A Trumpf release | February 2, 2017 ||
Innovative Machinery Group (IMG) announced today that the company will formally change its name to “Tsugami Automation” beginning February 1, 2017.
IMG specializes in the design, fabrication and integration of Precision Tsugami machine tool optimization products, including robotics, vibratory feeder systems, parts collection systems and custom machine tool accessories. The company designed and built the world’s first LaserSwiss machine, which combines Swiss style CNC machining and laser cutting into one machine with a single shared software platform.
“We’re rebranding the company to help manufacturers more easily understand what we do,” IMG President Graham Noake explained. “When they hear ‘Tsugami Automation’ they should immediately recognize that we are entirely focused on customizing and optimizing Tsugami machines.”
The renamed organization is a sister company of Tsugami/Rem Sales, the exclusive North American importer of Precision Tsugami machine tools. Both companies are divisions of Morris Group, Inc., one of North America’s largest machine tool distributors. Tsugami Automation products are distributed through Tsugami/Rem Sales.
“Tsugami Automation has a uniquely wide range of experience and skillsets in custom tooling, integrated laser cutting and laser welding and the development of mechanical and robotic loading, marking, cleaning, measuring, and unloading systems for Tsugami machine tools,” Noake said. “We are completely focused on expanding the capabilities of these machines and optimizing their performance.”
Tsugami Automation and Tsugami/Rem Sales expect to launch their newest LaserSwiss, an SS207-5AX LaserSwiss with an integrated welding system, at the MD&M West show in Anaheim, CA in February. The 20 mm, seven-axis CNC machine integrates two SPI laser systems, one for cutting operations and a second one for welding.
“It’s the first machine of its kind,” Noake noted, “and we expect it to provide significant competitive advantages to manufacturers of small precision parts.”
About Tsugami Automation
Tsugami Automation is a division of Morris Group, Inc. of Windsor, Connecticut. The company specializes in the design, manufacture, and delivery of Tsugami machine tool optimization products, including robotics, lasers, vibratory feeder systems, parts collection systems, and custom machine tool accessories.
About Morris Group, Inc.
Morris Group, Inc. (http://www.morrisgroupinc.com/), whose history dates to 1941, is one of the largest machine tool distribution networks in North America. Based in Windsor, Connecticut, the family-owned and operated company has 14 business units throughout the United States.
Palace of the Alhambra, Spain
By: Charles Nathaniel Worsley (1862-1923)
From the collection of Sir Heaton Rhodes
Oil on canvas - 118cm x 162cm
Valued $12,000 - $18,000
Offers invited over $9,000
Contact: Henry Newrick – (+64 ) 27 471 2242
Mount Egmont with Lake
By: John Philemon Backhouse (1845-1908)
Oil on Sea Shell - 13cm x 14cm
Valued $2,000-$3,000
Offers invited over $1,500
Contact: Henry Newrick – (+64 ) 27 471 2242